Onsite and virtual electrical safety training built for the hazards of Texas oil and gas operations, petrochemical facilities, refineries, and construction — led by Certified Safety Professionals with 30+ years of field experience.
Texas has the highest concentration of oil and gas production, refining capacity, and petrochemical manufacturing in the United States — and the electrical hazards that come with it. High-voltage motor control centers, large-scale switchgear, and complex PDU configurations in industrial facilities demand electrical safety training that goes beyond generic compliance. We deliver NFPA 70E 2024 training built specifically for the work Texas qualified electrical workers actually do.
Every industry sector in Texas carries its own electrical hazard profile. We build curriculum around the specific equipment, voltage levels, and classified locations your workers encounter every day.
High-voltage motor control centers, wellhead electrical systems, and hazardous (classified) locations under NEC Article 500. Workers face arc flash exposure during routine maintenance of pumping stations and compression facilities where lockout/tagout failures are life-threatening.
Continuous process facilities with 480V to 15kV distribution systems, large rotating equipment, and classified electrical areas. Arc flash incident energy levels in refinery switchgear rooms routinely exceed 40 cal/cm².
Texas construction sites and transmission/distribution utilities face unique NFPA 70E/OSHA 29 CFR 1926 Subpart K intersections. Electrical contractors working on new petrochemical buildouts must navigate both general industry and construction electrical safety standards simultaneously.
Municipal electrical utilities and water/wastewater treatment facilities require training on switchgear up to 15kV, transformer maintenance, and OSHA 29 CFR 1910.269 compliance alongside NFPA 70E.
Texas data centers — particularly in the Dallas–Fort Worth corridor — operate critical UPS systems, 480V bus duct, and generator switchgear requiring trained qualified electrical workers for live work justification and energized electrical work permits.
Texas manufacturing facilities, including automotive, food processing, and chemical production, run complex 480V and 4.16kV distribution systems where arc flash studies and qualified worker training are required under OSHA General Duty Clause.
Texas operates under Federal OSHA — there is no Texas State Plan. Employers in oil and gas (29 CFR 1910 Subpart S), construction (29 CFR 1926 Subpart K), and utilities (29 CFR 1910.269) are all subject to federal electrical safety standards that incorporate NFPA 70E by reference.
The OSHA General Duty Clause (Section 5(a)(1)) requires employers to protect workers from recognized hazards — and arc flash is explicitly recognized. Training qualified electrical workers to NFPA 70E 2024 standards is the most defensible compliance posture available to Texas employers.
For oil and gas operations, the intersection of OSHA 1910 Subpart S electrical standards and NEC Article 500 classified location requirements creates a layered compliance obligation that demands training tailored to each facility's specific hazard categories, PPE ratings, and written safety procedures.
Onsite delivery to your facility, anywhere in the state
Both formats are available onsite at your facility or virtually via Zoom or Microsoft Teams. All sessions are led live by a Certified Safety Professional.
Full NFPA 70E 2024 curriculum covering all requirements for qualifying electrical workers in oil/gas, petrochemical, industrial, and construction environments.
Best for: Initial qualification or triennial retraining of electrical workers in oil/gas and industrial settings.
Request a QuoteCondensed review for workers with prior NFPA 70E training, covering 2024 edition changes, regulatory updates, and reinforcement of core electrical safety practices.
Best for: Annual compliance refreshers at refineries, petrochemical plants, and utility operations.
Request a QuoteAnswers to the questions Texas safety managers and EHS directors ask most often.
Federal OSHA does not explicitly cite NFPA 70E in 29 CFR 1910 Subpart S, but OSHA enforcement uses it as the recognized industry standard for electrical safety. Employers who follow NFPA 70E 2024 have the strongest available defense under the General Duty Clause. In OSHA investigations involving electrical incidents at oil and gas facilities, NFPA 70E compliance is routinely used to evaluate whether an employer took adequate precautions to protect workers from recognized arc flash hazards.
Yes. We routinely deliver training at operating refineries, petrochemical plants, and production facilities across the Gulf Coast and Permian Basin. We build the curriculum around your facility’s specific equipment, hazard categories, and PPE inventory. Before each engagement we review your arc flash study, one-line diagrams (where available), and existing electrical safety program to ensure the training addresses the actual hazards your workers face on the floor.
We cap all sessions at 20 participants to ensure every worker receives individual attention and meaningful engagement with the material. Smaller group sizes produce measurably better outcomes — reflected in our 9.55/10 participant rating. If your workforce requires training for more than 20 workers, we schedule additional sessions at your facility rather than exceeding the cap.
We respond to every inquiry within 24 hours. Tell us your location, workforce size, and industry and we’ll build a program around your specific hazards and schedule.